Pulverizer Equipment


Ultra-fine Powders Of Pulverizer

 

 

CTNYSL-5

TECHNICAL PARAMETERS

Model

CTNYSL-5 

Power

900W 

Voltage

220V

Weight

28KG

Outside dimension

  530×550×300mm

Discharge size

10-100目

Main shaft speed

 2850r/min      

Production capacity

3-6Kg/H

1, Principles:
       
This model is used to achieve the dry abrasive material crushing equipment. It consists of crushing chamber, thrown hammers, grinding tile and so on. The feed material through the mouth into the crushing chamber, hammer and grind in the rejection of being squeezed between the tiles, impact, grinding, due to rejection of hammer movement also caused a flow of air, so air driving the crushed material through the screen into the filter bag filter, air is discharged, materials, dust is collected to complete the pieces.
2, Applications:
       
This model is a continuous feed-type grinding, production from a few kilograms to more than ten kilograms of range (as the case may be material), so is ideal for pilot and small scale production of the user, can be widely used in Chinese medicine, Western medicine, food, feed , chemicals, agriculture, research institutes, universities and other industries, and drug stores, pharmacies, clinics and other users.
3, features:
1, thin and high adaptability of the material, as Gaixing Ji grinding method using a unique, in particular, is difficult to crush the fibers, high toughness materials, high hardness materials, can get a good grinding effect. Group, high-quality steel blade, good wear resistance; grinding tile way by the movement of materials calculated by the tight arrangement of a certain angle, you can speed up the grinding speed and reduce the amount of slag deposits and extend the mission.
2, good stability, low noise, Gai Xingji adopted the "uniform force to the bulk" of the design structure, the
With no vibration, no fixed, easy to use.
3, no dust, low loss, easy to clean, safe high-performance, Gai Xingji a fully enclosed design structure, no dead ends, and with a no fuse protection overload and misuse, ensuring the realization of these properties; crushing the lower chamber wear-resistant stainless steel liner, the center set the dust cover, effectively prevent the dust into the motor; mill watts and are easily detachable blade unit, which will help clean up, to prevent sticking between the dye of different materials, without fans, with the knife is caused by rotation air flow, so there is no dust, no dust removal equipment .
4, screen made of hard stainless steel is made by precision drilling, hole density larger powder through the better.
 

 


IT PROMOTING: BEIJING YIYUAN IT LTD

IN&EXPORT: BEIJING YIYUAN ECONOMIC TRADE LTD

WEBSITE: machine.mycotrade.com

E-MAIL: sales@mycotrade.com