Pulverizer Equipment


Ultra-fine Powders Of Pulverizer

 

 

                 CTNYSC-701                     

TECHNICAL PARAMETERS

Model

CTNYSC-701

Power

1.875Kw                     

Production capacity

0.5-4Kg/h

Voltage

220V

Weight

140Kg

Outside dimension

850×700×750(mm)

Discharge size

500-13000目

Main shaft speed

200r/min-1000r/min

1, Principles:
    
YSC Series Ultrafine mill grinding machine is the use of pressure and shear in the form of dry material to achieve ultrafine grinding equipment. It consists of cylindrical grinding chamber, grinding wheel, grinding rails, fans, material collection system and other components. Material through the feed port into the cylindrical grinding chamber, grinding rail is circular motion along the grinding wheel rolling, cutting and grinding to achieve. The materials be crushed due to negative pressure airflow through the fan out of the crushing chamber, into the material collection system, through the bag filter, air is discharged, materials, dust is collected to complete the pieces.
2, Applications:
    
Advanced Micro Devices mill YSC Series models can be widely used in Chinese medicine, Western medicine, pesticide, biotechnology, cosmetics, food, feed, chemicals, ceramics and other dry materials industry demand for ultra-fine powder. Especially for fibrous (such as herbs, fungus, etc.), toughness (animal horns, cotton, etc.), high hardness (such as diamond, ceramic, etc.) materials, crushing effect more perfect.
3 features:
(1) fineness, crushed plant fiber fineness of up to 8-20μm (D98); hard, brittle materials grinding fineness of 1-5μm (D98), some special materials, and even more detailed.
(2) the temperature is low, cleverly designed to avoid crushing the structure of the warming occurs. Speed of the grinding wheel is relatively low, thus greatly reducing the heat generated by friction; air out of the material from the crushing chamber, but also take away the heat. Therefore, at room temperature, the powder is only the maximum temperature below 45 ℃, fully meet the needs of most users, no longer a separate cooling device configuration, reduce the cost. Of course, higher for low temperature requirements of the particular user, the series of models also can load the water cooling system, and without increasing footprint, so as to achieve better low-temperature effect.
(3) low energy consumption, and compared to other forms of micro grinder, air compressor without the series of models and related ancillary equipment, making the power consumption greatly reduced; small footprint, saving space; control is simple, operatives do not need too much, saving labor costs.
(4) non-polluting, low loss, supplies provinces, all of high quality stainless steel, avoiding the access to other media; whole structure is clear, material crushing, collection fully, reducing the wear and tear; grinding wheel and rail with special super-hard stainless steel, not easy
wear, long life, thereby reducing the cost.
(5) control is simple, adjustable and strong, due to host motor, ext motor inverter control technology are used to enable users in different fineness within the scope of any regulation, to better meet the needs of a wide range of fineness.
(6) compact, low vibration, no special fixed anchor bolts can be moved around according to the situation using the site.

 

 


IT PROMOTING: BEIJING YIYUAN IT LTD

IN&EXPORT: BEIJING YIYUAN ECONOMIC TRADE LTD

WEBSITE: machine.mycotrade.com

E-MAIL: sales@mycotrade.com