Product introduction

Tempered glass is heated to the softening temperature of the glass even after the rapid cooling, so that the glass surface to obtain compressive stress of the glass. During the cooling process, the tempered glass will be quickly solidified due to external, but internal cooled slowly. Therefore it increases the strength and thermal stability of the glass.

Performance characteristic

1. High strength

2. Safety

3. Bearing the heat shock

Half toughened glass

Half toughened glass is also called heat strengthened glass, tempered glass and its production process basically the same: it is heated to near the glass softening temperature after cooling from uniform. In the cooling process, due to the smaller cooling air pressure, cooling rate slower than the cooling rate of glass, which the intermediate layer and the temperature coefficient of the surface is relatively small, resulting in the density difference between layers is relatively small, resulting in pressure values ​​should be less.

Performance and characteristics

1. High Intension

2. Heat resistant toughened glass

3. Half tempered glass has not the self-blast phenomenon.

Quality standard

accord with BSEN12501－1-2000 British standard and ASTMC1048 standard of the United States of America.

Specifications: Maximum size: 3000mm×6000mm

Minimum size: 300mm×460mm;

Thickness range: 4mm—25mm

>Curved Tempered Glass

Product introduction

Curved tempered glass is that the original float glass to be heated to its softening temperature so that the glass bending, and then cooled down rapidly by special facility.

Hot curved tempered glass is that the original float glass to be heated to the softening temperature, by weight or external force to bend and shape throughout the natural cooling to be glass products.

Performance characteristic

Safety, impact strength, thermal stability is same as the flat tempered glass, the wind pressure resistant strength and deflection performance are better than the flat tempered glass.

Curved tempered glass is mostly applied to the arc shape of glass curtain wall, ceiling lighting, sightseeing elevator, indoor arc glass partition, glass railing, indoor decoration, furniture etc.

Hot curved tempered glass is used for furniture, cabinets, double curved surface and the cone type building.

Product variety

Colored float glass, colored coating film and low-E and its composite hollow, laminated glass products.

Color: white, ultrawhite, green, blue, grey, tea, coated glass.

Curved tempered glass processing specifications:
The largest size: 2440mm x 4200mm
The minimum size: 600mm x 400mm
The minimum bending radius: 800mm (5-6mm thickness) 1000mm (8-12mm thickness) 1500mm (15-19mm thickness)
Maximum height of arch: 700mm
Thickness: 5mm-19mm

Hot curved tempered glass processing specifications:
Maximum size: 2440mm x 5000mm, arc slotted angle <90°
Processing thickness: 4mm-19mm

>Reflective glass

Coated Glass also is known as reflective glass. Coated glass is coated on the glass surface of one or more layers of metal, alloy or metal compound film to change the optical properties of glass, to meet certain requirements. Coated glass according to the different characteristics of products can be divided into the following categories: heat-reflective glass, low-E glass, Low-E, conductive film glass.

>Insulating glass

Insulating glass is composed of two or more pieces of glass inside the aluminum box filled with molecular sieve adsorbents interval of a certain width of the space, then the edge of high-strength adhesive sealant made of glass components. The company has Number of imported insulating glass production line, choose high-quality float glass sheet and hollow auxiliary materials, insulating glass to ensure excellent performance and have the following characteristics:

Thermal properties: the lower the U value (heat transfer coefficient), inert gas is more effective.

Optical properties: according to actual needs, a very flexible choice of different sunlight projection and reflection.

Compartment properties: insulating glass generally reduces the noise 30 dB, while the inert gas can be based on the original and then reduced by 5 decibels.

Anti-condensation properties: the state of the insulating glass than the dew point (-40 ℃) lower to -65 ℃, ensure that the insulating glass seal and extend the life of insulating glass.

Sealing: aluminum frame (frame interval) once formed butyl rubber and polysulfide rubber or plastic structural double sealed to ensure the sealing and insulating glass to extend the life of insulating glass.

>Laminated Glass

 

Product Introduction

Laminated glass is introduced between the glass folder tough polyvinyl butyral (PVB) intermediate modulus, high temperature high pressure processed into composite glass. Toughness of PVB glass is very good, in the laminated glass broken by external violent impact, and the film will absorb a lot of impact energy, and make rapid decay, so the laminated glass is difficult to breakdown. Even laminated glass broken, glass fragments basic on the adhesion of the film, laminated glass to keep the entire piece of debris does not fall off, so it is a real sense of safety glass. Film made of transparent PVB laminated glass, its appearance and basic installation is no different from ordinary glass, and durable.

Characteristics of laminated glass:

1. Safety: Installation of laminated glass in buildings subject to any external shocks. Even the glass is broken while the laminated glass will be still maintaining the original integrity of the framework. Person inside and outside the building would not hurt by the flying glass debris.

2. Anti-hurricane and earthquake: Even the glasses are broken while they will remain in situ and not drop to ground.

3. Bullet proof: A multi-Layer sandwich can create multiple levels of bullet-proof, explosion-proof glass.

4. UV: the sun's ultraviolet rays are a great impediment, every UV rate of 99% or more, to avoid ultraviolet radiation.

5. Noise resistance: PVB film hinders the role of sound waves, thus reducing noise.

Application

For the characteristics of laminated glass, it is widely used in building windows and doors, walls, ceiling, elevated floor, furniture, windows, counters, aquariums, large areas of glass curtain wall.

Product Specifications: Maximum size: 3210mm × 6000mm

Total thickness: 5mm-60mm (curved clamp size depends on bent glass size.)

Quality standard: ASTMC1172 U.S. standards

AS/NZS2208 Australian Standard

>Bulletproof glass

Product introduction

Bullet-proof glass is described by the two or more glass (inorganic or organic glass) with a middle layer of PVB film in a certain temperature, glued together under pressure, within range of weapons can stop bullets penetrate the human body and property provide multi-layer protective glass combination, a bullet-proof, explosion-proof, anti-theft feature, yet the characteristics of ordinary laminated glass is widely used in bullet-proof glass: building: the financial system, banks, Museum, jewelry, luxury villas; car: heads of state, dignitaries, rich with bullet-proof vehicles, bank A variety of special armored car.