Metallographic microscope

4YXⅠ monocular metallographic microscope

Product description

One, Use

For the identification and analysis of various metal and alloy material structure, widely used in laboratory or factory casting quality identification; the testing of raw materials or materials handling after the metallographic analysis; as well as on such as spraying the surface of some surface phenomenon research work.

      The instrument can be matched with microscopic photography photographic device.

Two, Specifications

      1. The objective lens

       2．eyepiece

3. magnification: 1OO x ~ 1250 x

4. Mechanical barrel length: 160 mm

5. micro focus

Range: 7 mm

Scale grid value: 0.002 mm

6. crude dynamic focusing range: 7 mm

7. machine working table: 75 x 50 mm

8. light bulb: 6 volts 12 watts bromine tungsten lamp

9. instrument weight: 5 kg

10. volume of the packing box: 360 x 246 x 350 mm

Three, Sets of equipment

1. microscope main body : one

2. stage pressure spring :one

3. slides of phi 10, Phi 20, Phi 42 : each one

4. color ( yellow, green, gray and frosted glass) : each one

5. Chinese fir oil : one bottle

6. light bulbs ( bromine tungsten lamp ) : 2 ( reserve )

7. eyepiece 10 x, 12.5 x 1 : each one

8. objective 10 x, 40 x, 100 x : each one

9. single barrel : one

10.1O x micrometer eyepiece : one

11. micrometer ( lattice value of 0.01 mm ) : one

12. options:  photographic device   1 sets

The apparatus is inverted microscope, because the sample is observed on the surface and table surface contact, therefore with the specimen height unrelated, convenient use, compact structure, beautiful appearance, a pedestal bearing area is large, strong arm, so that the instrument with a low center of gravity position is stable and reliable, because the eyepiece and the supporting surface is 45 degrees tilt, allowing observation of comfort.